Table of Contents
Advertisement
User's Manual PNVR200 series
9.4. Live
Live Screen at glance
No.
No. Name
a
View Selection tab
b
Live
c
Split Mode
d
Sequence
Status
Log
e
PTZ
Refresh Time
Reload
f
Voice transmission
g
Channel
Save
Print
h
Capture
ActiveX Settings
Description
You can switch to the live, playback and setup screen and check the provided
information.
Display the live screen of the currently connected NVR.
Select and switch to a desired split-screen mode.
Set the sequence mode, switch to the next camera, zoom the screen or select the full
screen mode.
Show the connection status of each channel.
Show the log.
You can control PTZ cameras connected to each channel. (Only for PTZ cameras.)
Set the interval at which the NVR Status is refreshed.
Load the NVR Status immediately.
With the microphone, your voice will be transmitted to the NVR, or you can turn on
or off the output of the voice signal
Select a channel listed in the screen.
Save the live video on the screen.
Print out the current screen.
Capture the selected image.
Configure the ActiveX settings or specify the saving path of the captured image.
75
Advertisement
Table of Contents
