Motion Recording; Alarm Recording - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series
5.2.7.

Motion Recording

Specify the recording size of the motion event if it occurs and make schedule for that recording.
1. From the <RECORD SETUP> menu, select <MOTION
RECORDING>.
From <OPERATION MODE>, you must set
<RECORDING CONFIGURATION MODE> to <MANUAL
CONFIGURATION> before you can set the <MOTION
RECORDING>.
2. Use the [▲▼◀▶] buttons on the remote control or
use the mouse to select either <SIZE/FPS/QUALITY>
or <SCHEDULE>.
3. Set each item for the motion recording.
For more information, see the "Continuous
Recording".
4. To apply the change, click <APPLY> in the bottom of
the screen.
5. When done, press the [exit] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
5.2.8.

Alarm Recording

Specify the recording size of the alarm event if it occurs and make schedule for that recording.
1. From the <RECORD SETUP> menu, select <ALARM
RECORDING>.
From <OPERATION MODE>, you must set
<RECORDING CONFIGURATION MODE> to <MANUAL
CONFIGURATION> before you can set the <ALARM
RECORDING>.
2. Use the [▲▼◀▶] buttons on the remote control or
use the mouse to select either <SIZE/FPS/QUALITY>
or <SCHEDULE>.
3. Set each item for the alarm recording.
For more information, see the "Continuous
Recording".
4. To apply the change, click <APPLY> in the bottom of
the screen.
5. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to theprevious menu.
61