Orion PNVR200 Quick Start Manual

Network Connection
5 \ \
ALARM OUT RS-485
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK)
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK) ALARM OUT RS-485
Network
AUDIO IN
DC 48V ALARM IN RS-232 ALARM IN RS-232
Setting
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA AUDIO OUT
HD MONITOR
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA
HD MONITOR
PWR RESET WAN 4 3 2
Local PC
ADSL Modem
2.
When the login dialog appears, enter the user name
and password.
The default ID and password

- User name : ADMIN
- Password : 1234
Be aware when you enter the ID whether it is upper or lower case
How to download and access the iOS-specific viewer
6
\ \
Access
to the
mobile
viewer
1. 2.
From your iPhone, From the lower
access App store. menu bar, click
< >.
How to download and access the Android-specific viewer
\ \
1. 2.
From your From the top
smart phone, menu bar, click
access the
< >.
Market.
To access the Web Viewer
\ \
AUDIO IN
DC 12V
AUDIO OUT
1.
Open the browser and enter the IP address of NVR, or enter the URL address in
the address bar.
ex) if you use the DDNS of the NVR:
http://00115f123456.dvrlink.net :8080
If you do use the IP address of the NVR:
http://192.168.0.210 : 8080
Broadband
For more information about the router and network settings, refer to the user
1 Router
manual of the respective product.
3. 5.
Click the upper warning bar to install the ActiveX When the ActiveX is installed completely, you will
before enabling the add-in function. see the live screen.
4.
When the security warning window appears, click For more information about using the Web viewer, refer to

<Install>. the user manual.
3. 4.
Type "nViewer" in Select "nViewer"
the search bar. to install it.
3. 4.
Type "nViewer" Select "nViewer"
in the search to install it.
bar.
Quick Guide
4CH/8CH Full HD NVR
Rear View
1 \ \
4 Channel
Installation
DC 48V
8 Channel
DC 48V
Basic Layout
\ \
Network
5.
When done, Attached
select "nViewer" Storage
again to run it.
Internet
CMS,
Web viewer
Mobile viewer
This product supports Full HD that can connect to HDMI 1080P/60Hz monitors only.

Signal connection for POS and ATM is scheduled to be upgraded later.

5.
When done,
select "nViewer"
again and
install it.
No.
a b c d e
a
ALARM OUT RS-485
CAM 1 CAM 3 WAN(UPLINK)
b
AUDIO IN
ALARM IN RS-232
DC 12V
c
CAM 2 CAM 4 LAN(DOWNLINK) eSATA HD MONITOR AUDIO OUT
d
n m l k j i h g f
e
f
a b c d e
g
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK) ALARM OUT RS-485
AUDIO IN
h
ALARM IN RS-232 DC 12V
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA HD MONITOR AUDIO OUT
i
n m l k j i h g f
j
k
l
m
n
\ \
CAM 1
CAM 3
DC 48V
CAM 5
CAM
7
WAN
(UPL INK)
CAM
2 ALARM
CAM OUT
4 RS-485
CAM
6 AUD IO IN
CAM
IP Camera 8 LAN( ALARM
DOW IN RS-232
NLIN K)
eSAT A VGA
HD MON
ITOR DC 12V
AUD IO OUT
eSATA (for external
storage device)
Sensor
Speaker
Alarm
Microphone
Full HD monitor
Control 
Device
POS
ATM
Access
controller
IP Camera
J
Item Description
Ethernet ports used for connecting the network camera video and power.
CAM1~CAM8
It allows supplying power to camera with PoE.

WAN(UPLINK) Network port for connection to the Internet, router or hub.
AUDIO IN Microphone connection port.
ALARM OUT Alarm Out port.
Communications port for connecting peripherals such as system
RS-485
keyboard.
NVR power input port.
DC 12V
Connect to a 12V adaptor.
Signal connection port for POS and ATM.
RS-232C
Scheduled to be upgraded.

ALARM IN Alarm input signal port.
AUDIO OUT Port for speaker connection.
Port for connecting a full HD(1920x1080) supported monitor.
HD MONITOR
Use the HDMI cable to connect with a 1080p 60Hz monitor.
VGA VGA video output terminal.
eSATA Connection port for external SATA storage.
Port for connecting the dedicated network device.
LAN(DOWNLINK)
(Do not share with other device.)
Power input port for the camera (PoE compliant).
DC 48V
Connect to a 48V adaptor.
Connecting the camera
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK) ALARM OUT RS-485
AUDIO IN
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK) ALARM OUT RS-485
AUDIO IN
ALARM IN RS-232
DC 48V DC 48V ALARM IN RS-232 DC 12V DC 12V
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA HD MONITOR AUDIO OUT
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA AUDIO OUT
HD MONITOR
If the IP camera provides the alarm I/O port or Audio I/O port, you can make alarm or audio
connection. For more details, refer to the user manual of the IP camera.
CAM 1 CAM 3 CAM 5 CAM 7
CAM 1 CAM 3 CAM 5 CAM 7 WAN(UPLINK) ALARM OUT RS-485
AUDIO IN
DC 48V DC 48V ALARM IN RS-232 DC 12V
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK) eSATA HD MONITOR AUDIO OUT
CAM 2 CAM 4 CAM 6 CAM 8 LAN(DOWNLINK)
Hub or Router NVR
This product works only in a separate dedicated network to the IP cameras for stable recording
performance.
This is why this product does not operate at all if connected to the IP camera via the same
network shared with the hub or router.