System Information; Control Device - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series
4.7.4.

System information

You can check the current system version and system-related settings.
1. From <SYSTEM SETUP> - <SYSTEM>, select <SYSTEM
INFORMATION>.
2. Check the status of the current system.
3. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
4.7.5.

Control Device

Configure the settings of the remote control and keyboard controller.
1. From <SYSTEM SETUP> - <SYSTEM>, select
<CONTROL DEVICE>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to set the connection
options for the control device.
> SYSTEM ID : Set the ID of the NVR so that the
keyboard controller can identify.
> PROTOCOL : Set up the protocol of the keyboard
controller.
> BAUD RATE : Set the data transmission speed.
> REMOTE CONTROLLER ID : Set the ID of the remote
control.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [exit] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
47