Buzzer Output - Orion PNVR204 4CH User Manual

User's Manual PNVR200 series
1. From <SYSTEM SETUP> - <AUDIO>, select < AUDIO >.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> DEFAULT LIVE AUDIO CHANNEL : select an audio
channel to monitor on the live screen.
> NETWORK AUDIO TRANSMISSION : decide if NVR
transfers the audio signal to the remote client.
> RECEIVE NETWORK AUDIO : decide if NVR receives
the audio signal from the remote client.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [exit] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
4.4.2.

Buzzer output

You can set to output the buzzer if you manipulate the remote control
1. From <SYSTEM SETUP> - <AUDIO>, select <BUZZER>.
2. Use the [▲▼◀▶/ENTER] buttons on the remote
control or use the mouse to select an item that you
want to edit.
> REMOTE CONTROL : specify the output of a beep
when you press a button on the remote control.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote
control or click <CLOSE> in the lower screen to return
to the previous menu.
38