Table of Contents
Advertisement
User's Manual PNVR200 series
Item
Timeline Date
Expand/Collapse
the timeline
Navigation
through
Timeline
Timeline Bar
3.1.4.
Quick Menu
Item
Channel No
Play
Zoom
Snapshot Capture
Audio ON/OFF
Microphone ON/OFF
ONE PUSH
3.1.5.
Using the status bar in the live mode
Selecting a split mode
Click a desired split mode from 1, 4, 9, 16, 6 and 8 split
screen. Or press the [DISPLAY] button on the
remote control until a desired split mode is displayed.
ν 8CH NVR model support only 1-, 4-, 9-, 6- and 8-split
screen modes.
Auto sequence
Click the Sequence button in the status bar, or press the
[SeQ] button on the remote control to perform the
specified sequence mode.
You can configure the sequence settings in <SeQUence>.
For details, refer to "Sequence".
Description
Display the date of the current timeline.
Click this to select a desired date of the timeline.
Expand or collapse the timeline.
Navigate through the timeline.
You can also use the mouse wheel to do the navigation.
Display the recording data with time. The color of each bar indicates
the following:
~ Green : Continuous Recording
~ Red : Alarm Recording
~ Blue : Motion Recording
~ Yellow: Panic Recording
Description
Display the number of the current channel.
Start playing the video of the selected channel from the specified time.
Operates (digital) zooming on the selected channel.
Capture the current live video and save it in the .jpeg format.
Then, you can save the captured video in the HDD or export it to an
external USB memory device.
Turn on or off the audio signal of the selected channel.
Turn on or off the microphone signal of the selected channel.
Automatically adjusts the focus, within the camera's focus range.
It is available only if supported by the connected camera.
25
Advertisement
Table of Contents
