User's Manual PNVR200 series
3.1. Live Screen at a Glance
The live screen largely consists of three components: video window, status bar and timeline zone.
3.1.1.
Video Window
Icons used in the video window.
Item
Camera ID
Record
Mode Icons
Audio I/O
Icons
Motion
Detection
Icon
3.1.2.
Status bar
Press the ▼ button on the remote control, or place the mouse in the lower area of the screen to display the status
bar.
Description
Show the camera ID.
Displayed if an event recording is reserved.
Display the status of the continuous recording.
Display the recording status when an alarm occurs.
Display the recording status when a motion event occurs.
Display the status of the emergency recording.
The audio signal of the connected camera is outputting.
The audio signal is transferring to the connected camera via the microphone.
A motion is detected by the connected camera.
23