NEC N8100-1575F User Manual page 99

BMC LAN Configuration Submenu
Option
Shared BMC LAN
LAN Connection
Type
IP Address
Subnet Mask
Default Gateway
DHCP
Web Interface
HTTP
HTTP Port
Number
HTTPS
HTTPS Port
Number
Command Line
Interface
Telnet
Telnet Port
Number
SSH
SSH Port Number
Clear BMC
Configuration
Parameter
[Disabled]
Enabled
[Auto Negotiation]
100Mbps Full Duplex
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
[192.168.001.001]
[255.255.255.000]
[000.000.000.000]
[Disabled]
Enabled
–
[Disabled]
Enabled
[80]
[Disabled]
Enabled
[443]
–
[Disabled]
Enabled
[23]
[Disabled]
Enabled
[22]
[Enter]
Configuring Your Server 4-23
Description
Set to "Disabled" if the
management LAN port is used for
management LAN.
Change to "Enabled" to use the
LAN port 2 for management LAN.
If set to "Enabled", the
management LAN port becomes
unavailable.
Specify the connection type for
management LAN port.
Specify an IP address for
management LAN.
Specify a subnet mask for
management LAN.
Specify a default gateway for
management LAN.
Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to
specify an IP address manually,
set to [Disabled].
–
Set to [Enabled] to use HTTP
communication for Web interface.
Specify the TCP port number
which the management LAN uses
for HTTP communication.
Set to [Enabled] to use HTTPS
communication for Web interface.
Specify the TCP port number
which the management LAN uses
for HTTPS communication.
–
Set to [Enabled] to use Telnet
communication as a command line
interface.
Specify the TCP port number to be
used for Telnet communication.
Set to [Enabled] to use SSH
communication as a command line
interface.
Specify the TCP port number to be
used for SSH communication.
Press Enter and select "Yes" to
initialize the BMC configuration.
Your Setting
[ ]: Factory-set