10-32 Troubleshooting
The Telnet Service is not installed:
Adjust the computer name to 14 characters or less, and then install the Telnet
→
Service according to <How to install the Telnet Service>.
<How to install the Telnet Service>
1.
Click [Run] on Start menu.
2.
Type "tlntsvr /service" in the [Open] box, and click [OK].
3.
Click Start menu, point to [Control Panel] and click [Computer Management] and then
click the [Services] to specify whether the Telnet Service is registered.
* When the installation of Telnet Service is finished, there is no problem if the computer
name is set to 15 characters or more.
Power ON/OFF (Wake On LAN) feature does not work:
Immediately after the AC power is turned on, the Remote Power ON/OFF feature
→
(Wake ON LAN) is disabled. Start Windows 2003 once, provide settings as shown
below, then shutdown the system. After restart, the Remote Power On/Off feature
is available unless the AC power is turned off.
Select [Start] → [Administrative Tools] → [Computer Management].
Select Device Manager, double-click [Intel(R) PRO/1000EB Network Connection
with I/O Acceleration #n] under Network Adapter, and specify as follows in
[Detail] tab.
PME:
Wake On: [Magic Packet]
The system time lags:
If you do not use the server that adjust time such as NTP (Network Time Protocol)
→
Server, the system time may differ from actual time.
In this case, use NTP server or disable "Windows Time Service".
[ON]