Maintenance Tools; System Diagnostic Utility; Remote Management - NEC N8100-1575F User Manual

Maintenance Tools

The Maintenance Tools is used for maintenance and fault analysis of the server. This tool is usually
used by the service representative.
See Chapter 10 for details.

System Diagnostic Utility

The system diagnostic utility contained in the NEC EXPRESSBUILDER is useful to detect
hardware failures. See Chapter 9 for details.

Remote Management

The server may be monitored and managed via LAN/WAN by using EXPRESSSCOPE Engine 2
and NEC ESMPRO Manager utility stored in NEC EXPRESSBUILDER DVD.
The EXPRESSSCOPE Engine 2 provides the following features:
Monitoring of temperature, voltage, fans, and hard disk drives
Monitoring of power supply unit
Monitoring of hard disk drives
Generation of SEL (system event log) at occurrence of hardware failure
Monitoring of the system management watchdog timer
Monitoring of the periodic SMI timer
Remote management by using Web browser and Telnet/SSH client (e.g., resetting the
server, power on/off, viewing System Event Log (SEL))
Remote KVM and remote media features (A separately priced remote management license
is required.)
Remote management via LAN/WAN by using NEC ESMPRO Manager and centralized
management of several systems
For more information about remote management using Web browser, Telnet/SSH client, remote
KVM feature, and remote media feature, refer to the "EXPRESSSCOPE Engine 2 User's Guide"
stored in NEC EXPRESSBUILDER DVD.
NOTE:
visit our Web site to see the latest information about remote
console/remote media feature.
To use the Remote Management Extended License (N8115-03),
General Description 2-13