NEC N8100-1575F User Manual page 279

Error
Error message
code
8068 Unsupported Processor Speed detected on
CPU Slot 1.
8069 Unsupported Processor Speed detected on
CPU Slot 2.
8150 NVRAM Cleared by Jumper
8151 Password Cleared by Jumper
8160 Mismatch Processor Type/Speed detected
on Processor 1.
8161 Mismatch Processor Type/Speed detected
on Processor 2.
None Expansion ROM not initialized – PCI Mass
Storage Controller in slot xx
H/W Configuration of BMC is corrupted.
!! Update BMC F/W Configuration by
configuration tool !!
!! Refer to BMC configuration manual !!
Memory Scramble mode disabled
Troubleshooting 10-11
Recommended Action
Contact your service representative.
Start SETUP and provide setting again.
Start SETUP and set password again.
Contact your service representative.
Disable initialization of the optional device
expansion ROM by using the BIOS SETUP
utility (see Chapter 4).
Use the NEC EXPRESSBUILDER to
configure the remote management card
(see Chapter 8).
Contact your service representative.