Shure WA501 Instructions

WA501 Front Mount Antenna
Rack Mount Kit Installation
1. Remove and save the screws from
each side of the SC4 receiver, as
shown.
SC4 RECEIVER
(TOP VIEW)
2. Secure the supplied brackets to the
sides of the receiver with the screws
removed in Step 1.
SC4 RECEIVER
(TOP VIEW)
BRACKET
NOTE: There are four holes in each
bracket. Use the rear holes if the receiver
is to be recessed; use the front holes to
mount receiver flush to the rack.
3. Insert the two bulkhead adapters
through the holes in the front panel,
and secure them from each side,
using the supplied attaching hard-
ware.
SC4 RECEIVER
BULKHEAD
(TOP VIEW)
ADAPTER
2004, Shure Incorporated
©
27B8403 (Rev. 3)
FRONT
FRONT
BRACKET
BULKHEAD
ADAPTER
FRONT
4. Connect the supplied antenna cables
to the receiver antenna inputs and
the bulkhead adapters, as shown.
BULKHEAD
ADAPTER
5. Insert the receiver into the equipment
rack and secure the brackets to the
rack with the supplied screws.
6. Screw the antennas into the bulk-
head adaptors protruding through
the front panel.
ANTENNA
SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446
Model WA501
Instruction Sheet
SC4 RECEIVER
BULKHEAD
(TOP VIEW)
ADAPTER
FRONT
EQUIPMENT RACK
SC4 RECEIVER
(TOP VIEW)
FRONT
ANTENNA
Printed in U.S.A.