Advertisement
Quick Links
GENERAL
With Shure's Model WA440 Antenna Rack Mount Kit, the
antennas supplied with Shure wireless microphone re-
ceivers can be mounted on a standard 19–inch (483 mm)
audio equipment rack. Each Kit includes:
One Rack Panel
Two 2–Foot RF Cable Assemblies
Two Bulkhead Adapters
Four Locknuts
Four Lockwashers
INSTALLING THE WA440 RACK MOUNT KIT
1.
Mount the rack panel included in the kit to the equip-
ment rack, using four No. 10 screws (not supplied).
2.
If necessary, remove the antennas from the rear pan-
el of the receiver by rotating them counterclockwise.
WA440 Rack
Mount Panel
Bulkhead
Adapter
Lockwasher
Locknut
Antenna
Screws
(Not
Supplied)
Receiver
E2000, Shure Incorporated
27B8296 (Rev. 4)
Locknut
Lockwasher
Washers
(Not
Supplied)
Audio
Equipment
Rack
WA440 ANTENNA RACK MOUNT KIT INSTALLATION
Model WA440 User Guide
3.
Remove the locknuts from each bulkhead adapter in-
cluded in the kit and insert the adapters into two holes
in the rack panel.
4.
Install a lockwasher over each end of the bulkhead
adapters.
5.
Reinstall the locknuts over each end of the bulkhead
adapters and tighten them to secure the adapters to
the front panel.
6.
Screw the base of the antenna onto the adapter from
the front of the rack panel.
7.
Connect one end of each RF cable assembly to the
back of the bulkhead adapters.
8.
Attach the free ends of the RF cable assemblies to
the antenna input connectors (Channels A and B) on
the back of the receiver. Installation is now complete.
NOTE: If the rack cabinet has mounting
rails at the rear, the WA440 can be
mounted at the top rear of the rack, with
the antennas protruding from the rear of
the cabinet.
2 Foot
RF Cable
Antenna
WA440 Rack
Mount Panel
Audio
Equipment
Rack
SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446
Antenna Rack Mount Kit
Bulkhead
Adapter
2 Foot
RF Cable
Antenna
Input
Connector
Receiver
Printed in U.S.A.
Advertisement
