Dolby Digital Or Dts (Or Other Digital Surround Mode) Connection - Harman Kardon HKTS 8 Owner's Manual

Speaker Connections
Dolby Digital or DTS ®
(or Other Digital Surround Mode)
Connection
Use this installation method for Dolby Digital,
DTS ® or other digital surround processors:
Use the line-level input jack marked "SUB" for
the Low-Frequency Effects channel. Connect this
Front
Left
Surround
Left
jack to the LFE output or subwoofer output
on your receiver or amplifier. Connect each
speaker to the corresponding speaker terminals
on your receiver or amplifier.
Center
SUB-TS8 Subwoofer
LINE LEVEL IN
SUB
Front
Left
SUB/LFE
Out
Surround
Left
Center
Surround Back
Receiver
Surround
Back
Make sure that you have configured your sur-
round-sound processor for "Subwoofer On."
The front left, front right, center and rear speak-
ers should all be set to "Small."
R L
Front
Right
Surround
Right
Front
Right
Surround
Right
SPEAKER CONNECTIONS 9