Front View - Wacom Cintiq 22HD User Manual

FRONT VIEW

USB accessory port
Touch Strip Mode
One on each side. Press
to toggle between Touch
Strip functions.
See pen display controls.
See also using the
Express View display.
ExpressKeys
See pen display controls.
Contents Index
Status LED
• When using pen in active area of the pen display, lights blue when the
pen tip, eraser, or side switch are pressed.
• LED will not light unless the USB cable is plugged into an active USB
port and a video signal is present.
Power LED
• Lights blue when power has been supplied to Cintiq and a video signal
is present.
• Glows orange when no video signal is detected. (e.g., The computer is
turned off, starting up, or has entered a power management mode in
which video signals are not sent.)
Contents Index
19
Hardware control buttons
Press the right button to
work with LCD settings
using the On Screen
Display (OSD). When in
LCD settings (OSD) mode,
the four upper right
ExpressKeys are used for
adjusting the display
settings.
See also rear view.
19