Storing Your Food Processor - Sunbeam LC7900 Instruction Booklet

Storing your Food Processor continued
6.Close storage drawer, see figure 13.
Fig 13
Processing bowl storage, see figure 14.
1.Place the processing bowl onto the base of
the food processor.
2.Fit the spindle over the drive shaft.
3.Fit the universal 's' blade over spindle.
4.Place the 'variable slicing' blade over the
spindle and then fit the processing cover to
the processing bowl.
Cord storage
The power cord can be stored by pushing it
into the back of the motor base,
see figure 15.
Fig 15
12
Fig 14