Limiting Channel Position Selection; Setting Channels Manually - Grundig T 51-830 Multi/ICN User Manual

Limiting channel position selection

The ATS feature stores all channels it has found
and automatically blocks the first position to which
no program is assigned (the point of reversal).
That means when you use the p or P buttons, you
can choose only the channels that have been auto-
matically assigned.
This feature can also be manually defined. In the
following example, every channel from position 6
onwards will be "blocked".
Press the h and then the G button.
1
The page »DIALOG CENTER« will appear.
Select the »MANUAL TUNING« line using p or P
2
and confirm with G.
3 On the »MANUAL TUNING« page, choose channel
position 6 with the F or E buttons.
Choose the line »C/S« and use the buttons F or E
4
to choose »Channel« (or frequency, despending on
the preselection made in the »ADJUST COUNTRY«
menu, see page 5).
5 Choose the »Channel« (or frequency) line and use
the digit buttons 0...9 to input two zeros »00«
(at frequency 000).
Save the setting with G and end the operation
6
¢
with .
T XT
The first 5 channels can now be scrolled through in
quicker succession as the subsequent channels can
no longer be selected using the p and P buttons.
All single digit channel positions are still accessible
using the digit buttons 0 ... 9.
If 11 is blocked as the channel position, all subse-
quent channel positions can be selected with the
digit buttons 0 ... 9.

Setting channels manually

Press the h and then the G button.
1
The page »DIALOG CENTER« will appear.
Choose the »MANUAL TUNING« line with the p or
2
P buttons and confirm with G.
6
MANUAL TUNING
Program 01
Channel
C/S
Channel C 34
Finetun. 00
Standard automatic
OK Memorize 0 – 9 TXT
Entering channels directly
1 Select the channel position with the digit buttons
0 ... 9 or with the F or E buttons.
Select the line »C/S« with the p or P buttons.
2
Using F or E, select »Channel« or »Special chan-
nel«.
Select the »Kanal« line using the p or P button.
3
Enter the desired channel number (or frequency,
despending on the preselection made in the
»ADJUST COUNTRY« menu, see page 5) using the
numbered buttons 0 ... 9 or the F E buttons.
Select the line »Standard« using p or P.
4
Using F or E select the required setting.
Fine-tune the picture. Select the »Finetun.« line
5
using p or P.
Adjust the fine-tuning using F or E.
Save setting with the G button.
6
To set more channels, repeat the steps starting with
point 1 .
End setting with the ¢
7
T XT
Automatic search
Select the »Channel« line using p or P.
1
Start the automatic station search with the »blue«
2
o button.
Select the »Program« line using p or P. Select the
3
position where you would like to store the channel
with 0 ... 9 (01 – 99).
The colour and sound norms will be automatically
set.
Fine-tune the picture. Select the »Finetun.« line
4
using p or P.
The fine-tuning with F or E.
Save settings with G.
5
To set further channels, repeat steps starting with
point 1 .
Exit settings using the
6
button.
¢ button.
T XT