Preparation And Adjustments; Inserting Batteries Into Remote Control; Turning Set On And Off, Setting Standby; The Dialog Center As A User Guide - Grundig T 51-830 Multi/ICN User Manual

Prior to operation

Inserting batteries into remote control

!
Take note of the polarity indicated in the battery
compartment.
The following appears on the screen when
the batteries are spent: »Battery«.
Spent
Dispose of spent batteries in an environ-
mentally safe manner.
Turning the set on
Push the ü button on the set.
1
Channel position 1 will automatically appear.
If the remote control has not been used for a period
of 4 hours, the set will automatically switch to
standby mode. This is a safety measure, in case
you have forgotten to turn the set off.
Switching the set to standby mode
Press the button A on the remote control.
1
The set is not completely turned off (indicator light
glows).
The set can now be turned on with the remote
control.
Turning off the set completely
If you are not intending to use the set for an
extended period of time (e.g. at night), turn
the set completely off.
This will save energy.
Press the ü button on the set.
1
4
batteries must be
The DIALOG CENTER as a user
guide
The DIALOG CENTER and the individual pages of
the user guide display the possible functions and
the buttons on the remote control with which these
functions may be activated.
removed.
Button symbols and dialogue lines display possible
operating steps.
The characters on the screen are symbols for
the following buttons on the remote control:
Symbol
OK
Please remember the functions of these buttons, as
they will be used consistently throughout the
following operation steps!
DIALOG CENTER
LANGUAGE SELECTION
SLEEP TIMER
PARENTAL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
SERVICE
OK TXT
Button Function
P p
Selecting from a list on a
given page
F E
Changing settings
h
Calls up the DIALOG CENTER
(h and G) and returns
from a page to the DIALOG
CENTER.
G
Confirms function.