Picture tuning
To make specific adjustments to the picture, use
the »PICTURE« menu or the buttons on the remote
control.
Calling up »PICTURE« menu
Press 8 button.
1
The »PICTURE« menu page appears.
Adjust setting with P or p.
2
To exit the following settings, use the
Contrast
The set has been tested with maximum contrast in
order to control the reliability of all modules.
Depending on the location of the set and the light
level in the room (ambient light) it is a good idea to
reduce the contrast slightly for optimum picture
quality.
Set »Contrast« with F or E.
1
Sharpness
Tune picture sharpness to suit your individual pre-
ferences.
Set »Sharpness« using F or E.
1
8
PICTURE
Contrast
Sharpness
TXT
¢
T XT
Brightness and colour contrast
Press and hold » – « (Minus) or » + « (Plus) until
the desired value has been reached.
1
Set »Brightness« using
2
Set »Colour contrast« (colour) using
Factory settings (optimum setting)
1
Press
The page »AUX ...« will be displayed.
Pressing the G button activates the optimally
preset factory set values (e.g. for brightness, colour
contrast, volume, etc.).
button.
∑
.
button.
-
∑
.