Table of Contents
Advertisement
SPECIAL SETTINGS
MANUAL TUNING
Program
06
C/S
Channel
Channel
34
Finetun.
00
Norm
B/G (Universal)
Name
RTL2
OK Memorize
TXT
MANUAL TUNING
Program
06
C/S
Channel
Channel
00
Finetun.
00
Norm
B/G (Universal)
Name
RTL2
OK Memorize 0-9 •Tune
TXT
MANUAL TUNING
Program
06
C/S
Channel
Channel
34
Finetun.
00
Norm
B/G (Universal)
Name
RTL2
OK Memorize
0-9
TXT
Limiting channel selection
The ATS search saves all television channels found and automatically "blocks"
the first non-assigned channel position. This means that only the television chan-
nels which were found can be selected using channel selection. This feature can
also be defined manually. In the example, all channels from channel position 6
have been "blocked".
1
Call up » DIALOG CENTER« by pressing »
2
Select the line »MANUAL TUNING« with »,« or ».« and confirm with
»OK«.
3
Select the channel position (in the example, 6) with »F«
.
1... 0
»
«
4
Select the line » C/S « with »,« or ».« and use »F« or »E« to select
the » Channel« display.
Note:
The line »C/S« will not appear if the »SELECT COUNTRY« preselection
»others« and then »Cable (frequency sel./MHz)« were selected.
5
Select the line » Channel« with »,« or ».« and use
»00« or, in the case of frequency selection, »000« (dependent on the »SEL-
ECT COUNTRY« preselection).
6
Save the setting with »OK«.
– Now, only the first five channel positions (and the »AV« channel position)
can be selected.
– After the direct selection of the first blocked channel position
the example, 6), the "blocked" channel positions can be selected with
»,« or ».«.
7
Complete the setting with »TXT«.
Note:
If the blocked channel position is reallocated, the channel position limitation
set is cleared.
Setting TV channels
This setting is only necessary if a new TV channel is added and you wish to
maintain your own particular order for the channel positions. The TV channel
can be set directly or via the automatic channel search.
1
Call up » DIALOG CENTER« by pressing »
2
Select the line » MANUAL TUNING« with »,« or ».«, and confirm with
»OK«.
3
Select the channel position with »F«
4
Select the line » C/S « with »,« or ».«, and use »F« or »E« to select
the display » Channel« or »S-channel«.
Note:
The line »C/S« will not appear if the »SELECT COUNTRY« preselection
»others« and then »Cable (frequency sel./MHz)« were selected.
____________________________________________________
i
« and then »OK«.
i
« and then »OK«.
»E« or
1... 0
,
»
«
»E« or
,
1... 0
»
« to enter
(in
1... 0
»
«
.
19
Advertisement
Table of Contents
