10­ Connection/Preparation; Connecting The Antenna And Power Corda - Grundig 49 VLX 9681 SP User Instructions

CONNECTION/PREPARATION
Connecting­the­antenna­and­power­corda
3
1a To receive digital satellite channels (DVB-S),
connect the satellite antenna cable to the
antenna socket SATELLITE­MAIN­on the
television set;
1b To receive digital satellite programmes
(DVB-S) for the PIP function and the
advanced recording function for TV pro-
grammes, two cables with the satellite sig-
nals are needed. Connect the second cable
to the SATELLITE­SUB antenna socket on
the TV.
and / or
2a To receive terrestrial digital broadcasters
(DVB-T) connect the cable for the rooftop
or indoor antenna (passive or active indoor
antenna with its own power supply) to the
antenna socket ANT­IN on the television
set;
or
2b To receive digital cable channels (DVB-C)
connect the cable for the rooftop antenna
to the antenna socket ANT­IN on the televi-
sion set;
or
10­ ENGLISH
­-----------------------------------------------------
SERVICE
1b
HDMI3 HDMI4 SATELLITE
Optic Out LAN USB3 (ARC) ANT-IN
(MAIN) 13/18V max.500mA (SUB) 5 V max.50mA
1a
2
2c To receive analogue TV channels, connect
the cable for the rooftop antenna to the
antenna socket ANT­IN on the television
set.
Note:
When connecting an indoor antenna you
7
may have to try it out at different positions
until you get the best reception.
3 Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket
7
after you have connected the external
devices and the antenna.
Do not use an adapter plug or extension
7
cable which does not meet the applicable
safety standards. Do not make changes on
the power cord.