Table of Contents
Advertisement
10
6
SET-UP AND SAFETY
Wall mounting
The plasma screen should only be fixed to vertical walls.
The wall surface must be strong enough to bear the weight.
For wooden or cavity walls, use suitable wall plugs and screws.
Use fastening equipment suitable for a weight of 50 kg.
1
Mark the holes on the wall.
– The distance between the screws is 397 mm, and the openings for the
screws have a diameter of 10 mm.
2
Drill the holes in the wall, insert the wall plugs and screw in the screws.
Note:
Do not remove the spacer on the back, as otherwise you will not be able to
hear the subwoofers.
3
Hang the plasma screen on the screws.
Note:
You can also use the plasma screen as a standing device using the pedestal
(accessory).
Ask your specialist dealer.
_________________________________________________________________
397
Advertisement
Table of Contents
