Table of Contents
Advertisement
Display Source Info :
Language :
OSD Set Up
Pwr Down/Stand-By
Reset to factory Defaults
Sleep Timer :
Inputs / PIP
Picture
Display
Sound
Set Up
Info
Main Inputs :
Main input settings
Display :
Auto Search
Manual search
Sort
Delete
TV Standard :
Search Form :
Start Search
Program Start Point :
Country :
Germany
TV Standard :
Search Form :
Start Search
Program Start Point :
Country :
Germany
12
SETTINGS
1
Switch the device to standby by pressing the power switch »IO« on the left
side of the device, and then switch it on by pressing »P+« or one of the
numerical buttons on the remote control.
Setting the menu language
1
Press »i« to open the main menu.
On
English
2
Select »Einstellung« (Set Up) with »P+« or »P-« and confirm with » «.
3
Select »Sprache« (Language) by pressing »P+« or »P-«.
Off
4
Select the language by pressing » « or » «.
5
Press »i« to finish the setting.
Setting television channels automatically
The television set is equipped with an automatic station search system.
You start the station search and can then sort the television channels into your
order of preference.
There are 99 preset positions, to which you can assign television channels from
the antenna or from the cable connection.
You can also delete television channels from the channel list which were found
more than once or which have poor reception.
If you receive stations with different TV standards where you live, continue the
set-up with "Tuning to new television channels" on page 29.
1
Press »i« to open the main menu.
2
Select »Inputs/PIP« with »P+« or »P-« and confirm with » «.
3
TUNER
Select »Main inputs« with »P+« or »P-« and then press » « or » « to
select »TUNER«.
Main
4
Select »Main input settings« with »P+« or »P-« and confirm with » «.
5
Select »Auto search« with »P+« or »P-« and press » « to confirm.
6
Select »TV Standard« with »P+« or »P-« and select the standard with » «
or » «.
7
Select »Search Form« with »P+« or »P-« and then press » « or » « to
select »All«.
PAL BG
All
8
Select »Country« with »P+« or »P-« and select the country with » « or
-
» «.
01
Note:
If your country (the location) is not shown, select the option »Other«.
9
Select »Start Search« with »P+« or »P-« and confirm with » «.
PAL BG
– Display: »Search in progress...«. The station search begins, and may last
All
a few minutes, depending on the number of television channels received.
-
– After the search, the device switches to channel 1.
01
Note:
You can interrupt the search by pressing »
____________________________________________________________________________
« (red).
z
z
Advertisement
Table of Contents
