Table of Contents
Advertisement
OPERATION AS A PC MONITOR
LINE OUT
AUDIO LINE IN
YUV/VIDEO
PC
YC (S-VIDEO)
R
PC (RGB/DVI)
L
Main input :
PC (RGB)
Main input settings
Display :
Main
Connecting a PC
Note:
Turn off the television and the PC before connecting them.
1
Connect the
ate socket of the PC with the VGA cable provided (video signal).
ANTE
2
Connect the white and red AUDIO LINE IN »PC« sockets on the television
and the corresponding sockets on the PC with a cinch cable.
Operation with the PC
1
Turn on the television and the PC.
2
Select »Monitor operation« on the PC.
3
Select a preset station for the PC, then keep pressing »Z« until the message
»PC (RGB)« or »PC (DVI)« appears.
– The picture format of the PC (for example 1024 x 768) is displayed.
Note:
If there is no signal from the PC, the television automatically switches to
standby.
The television can be turned on again with »i«.
Settings for the PC
1
Press »i« to open the main menu.
2
Select »Inputs/PIP« with »P+« or »P-« and confirm with » «.
3
Select »Main input« with »P+« or »P-« and then press » « or » « to
select »PC (RGB)« or »PC (DVI)«.
LINE OUT
AUDIO LINE IN
THARUS 110
PW 110-9410 TOP
YUV/VIDEO
PC
YC (S-VIDEO)
G.BB 23-00
R
Input:
PC (RGB/DVI)
~
L
ANTENNA
115-230 V
50/60 Hz 3,6/1,8 A
Made for Grundig in Germany
2
1
»PC
(RGB/DVI)« socket on the television set and the appropri-
VIDEO LINE IN
EURO AV/SCART 1
Serial No.:
RS 232
V
U
Y
YC
MINISTERO P.T. (D.M. 26.03.92)
(VIDEO)
(S-VIDEO)
EURO AV/SCART 2
2133-0014-0725
______________
23
Advertisement
Table of Contents
