Television Operation; Switching On; Switching To And From Standby; Selecting Channels - Grundig Tharus 110 PW 110-9410 TOP User Manual

TELEVISION OPERATION

Switching on

1
Press the power switch »IO« on the left side of the device to switch it to
standby mode.
– The red LED lights up.
2 Switch the television by pressing »P+« or one of the numerical buttons
»1...
– The green LED lights up.

Switching to and from standby

1
Press » « to switch the device to standby mode.
2
Completely switch off the device by pressing the power switch »IO« on the
back of the device.
– In this way you save electricity.

Selecting channels

1
Use »1...0« to select channels directly.
2
Press »P+« or »P-« to move up and down channels.

Selecting channels from the preset list

1 Press »OK« to open the preset list.
2
Select the required channel position with »P+«, »P-«, » « or » «.
3
Press »i« to switch off the preset list.

Selecting channels from external devices

1
Keep pressing »Z« until the channel position is displayed.
– The current channel is displayed.
2
Switch back to television mode by pressing »Z« repeatedly until the »TV«
display (and the channel most recently selected, for example »TV - 1- ARD«)
appears.

Adjusting the volume

1 Adjust the volume with » « or » «.

Muting

1 Press »

Displaying/concealing the clock

1
You can display or conceal the clock by pressing » « (only for stations with
teletext).
0«.
d
« to switch the sound off (mute) and to switch it on again.
___________________________________
15