Volume :
Balance :
Equalizer :
Option :
Volume Line Out :
Max. Startup Volume :
AVC :
User Equalizer
Current Temperature :
Hardware version :
Software version :
V00TR2A
Display Source Info :
Language :
OSD Set Up
Pwr Down/Stand-By
Reset to factory Defaults
Sleep Timer :
Yes, delete my settings
22
CONVENIENCE FUNCTIONS
Setting the audio output signal level
This setting enables you to set the audio output signal for the
sockets.
1
Press »i« to open the main menu.
2
Select »Sound« with »P+« or »P-« and confirm with » «.
Classic
Mono
3
Select »Volume Line Out« with »P+« or »P-«.
Off
4
Set the volume of the audio output signal by pressing » « or » «.
5
Press »i« to finish the settings.
Calling up information
In this menu you will find information about the temperature of the device, the
hardware and the software version of the device.
1
Press »i« to open the main menu.
41.4
Rev02
2
Select »Info« with »P+« or »P-« and confirm with » «.
– The current information appears.
3
Press »i« to switch off the menu.
Resetting the device
All custom settings (for example, contrast, brightness, volume and switch-off
time) are restored to the original status.
Channels are not deleted.
On
1
Press »i« to open the main menu.
English
2
Select »Set Up« with »P+« or »P-« and confirm with » «.
Off
3
Select »Reset to factory Defaults« with »P+« or »P-«.
4
Confirm »Yes, delete my settings« by pressing » «.
-
5
Press »i« to finish the settings.
___________________________________________________
»LINE
OUT«