Operation As A Pc Monitor; Connecting A Pc; Operation With The Pc; Settings For The Pc - Grundig PlanaVision 42 PW 110-8610 TOP User Manual

AUDIO LINE IN
LINE
OUT CVBS/YUV PC S-VIDEO
L
PC DVI-I
R
24

OPERATION AS A PC MONITOR

Note:
Do not connect any other equipment while the device is switched on. Switch off
the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the external
devices and the antenna.

Connecting a PC

1
Connect the
socket of the PC with the VGA cable provided (video signal).
R
2
Connect the white and red LINE IN
the corresponding sockets on the PC with a cinch cable.

Operation with the PC

1
Turn on the television and the PC.
2
Select »Monitor operation« on the PC.
3
Select the channel for the PC by pressing »OK« to open the station list, press
»P+« or »P-« to select the channel and »OK« to confirm:
– The picture format of the PC (for example 1024 x 768) is displayed.
Note:
If there is no signal from the PC, the television automatically switches to
standby.
The television can be turned on again with »P+«.

Settings for the PC

1
Press »i« to open the main menu.
2
Select »Inputs / PiP« with »P+« or »P-« and confirm with »OK«.
2 1
»PC DVI-I« socket on the television set and the appropriate
»PC L
______________
R« sockets on the television and