Television Operation; Basic Functions - Grundig VISION 3 26-3830 T Manual

18

TELEVISION OPERATION

Basic functions

Switching on and off
8
1
Press » «, »1...0« or »P+« or »P-« to switch on the device from
standby mode.
8
2
Press the » « button to switch the television to standby mode.
Selecting channels
1
Use »1...0« to select channels directly.
2
Press »P+« or »P-« to move up and down channels.
3
Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to switch off the channel list.
Selecting stations from lists
You can select stations from various lists, (e.g. TV, favourites, FAV1).
1
Press »P« to call up the overview of channel lists.
– The overview is displayed.
2
Press »P+« or »P-« to select the channel list and »OK« to confirm.
3
Press »P+« or »P-« to select the channel and »OK« to confirm.
Selecting AV channels
1
Call up the »SOURCE TABLE« menu with »AV«.
2
Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3
Switch back to the television channel with »1...0«.
Switching between digital and analogue channels
1
Open the »SOURCE TABLE« menu by pressing »AV«.
2
Press »P+« or »P-« to select »DIGITAL TV« (digital presets) or
»ANALOG TV« (analogue presets) and press »OK« to confirm.
Adjusting the volume
1
Adjust the volume with »
Muting
1
p
Use » « to switch the sound off (mute) and to switch it on again.
Displaying time
1
You can display the time by pressing the »
4 3
« or » «.
¥
« button.
------------------------------------------