Home/Dual Time Display Priority; Setting The Current Time; Alarm Function; Clock - Grundig YB-P 2000 User Manual

YB-P 2000 page 10

CLOCK

/ time display priority
HOME DUAL
Your YB-P 2000 allows you to set two different times:
and . Normally, the
DUAL HOME
set the time to be displayed constantly.
DUAL
• The MODE button toggles the display between
and time indication. After 5 seconds, the display will
ALARM
return to the previous indication.
• Press MODE once. The
indication starts flashing.
• Press MEMO/TIME SET to display the dual time constantly.
– stops flashing.
DUAL
• To display the home time constantly again, press MODE
twice and then MEMO/TIME SET while

Setting the current time (

• Press MODE to set the display in
• Press MEMO/TIME SET.
– The time digits start flashing.
• Use the H 3 button to set the hours and the M 4 button to
set the minutes.
– A single press of the H 3 or M 4 button advances the
setting by 1 hour or 1 minute respectively. If the button is
held pressed, the setting advances rapidly.
– The minutes will not be carried over to the hours if, for
example, the minutes indication changes from '59' to '00'.
• Press MEMO/TIME SET to store the setting
– If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
10
HOME
time has priority. You can also
,
HOME
time appears and the
DUAL DUAL
is flashing.
HOME
or )
HOME DUAL
or time mode.
HOME DUAL

Alarm function

You can use your world receiver as an alarm clock. To use this
function you first have to set the alarm time. You will be woken
with a bleep, or by the radio.
DUAL
Setting the alarm time
• Press MODE repeatedly until
• Press MEMO/TIME SET.
– The time digits start flashing.
• Use the H 3 button to set the hours and the M 4 button to
set the minutes (in the same way as the clock time).
• Press MEMO/TIME SET to store the setting
– If you do not press MEMO/TIME SET, the display will return
to the previous time setting after 5 seconds.
Selecting the alarm mode
• Use the RADIO/BUZZ switch to select the alarm mode.
Switching the alarm on
• Press ALARM.
– 'ALARM' and the symbol for the
selected alarm mode ( / ) will
appear on the display:
Switching the alarm off
• Press ALARM.
– The alarm signs will disappear.
• When the alarm sounds, you can also switch the alarm off
by pressing the POWER button.
ALARM
starts flashing on the display.
ALARM