Table of Contents
Advertisement
YB-P 2000 page 12
Technical specifications
Power supply: Batteries: ...........................By 3x 1.5 V batteries (IEC LR 6)
External supply: ..........By a commercial 4.5 V DC mains unit
Output power
.....................................................................250 mW
Built-in aerials .....................................Telescopic aerial for FM and SW
................................................Ferrite rod aerial for MW
Connecting sockets
For external voltage supply DC 4.5V:...................................Coaxial socket
For earphone p: .......Socket for jack plug of 3.5 mm ø, 32 Ohm impedance
Wavebands:
FM: ..............................................87.5 .........108 MHz
MW (10 kHz steps): ........................520 .......1710 kHz
MW (9 kHz steps): ..........................522 .......1620 kHz
SW1: ...........................................2.30 ........7.40 MHz
SW2 ............................................9.40 ......26.10 MHz
Tuning steps:
FM: ...................................................................50 kHz
AM: ....................................................................5 kHz
resp. MW:............................................... / 9 / 10 kHz
Dimensions
(w x h x d): ............................approx. 142 x 92 x 35 mm
Weight:
..............................................................approx. 330 g
Accessories:
.....................................................................Ident card
..........................................................Instructions for use
.........................................................stereo in-earphones
.................................................................leather cover
Subject to technical alterations and alterations in styling E. and O.E.
12
GENERAL INFORMATION
(outer diameter 5.5 mm, inner diameter 2.1 mm)
Neutral conductor connected to chassis.
Maintenance
• Only a soft cloth which picks up dust should
be used to clean the cabinet. Do not use
aggresive polishes or cleaning agents.
• Do not leave the set for any length of time in
direct sunlight or other places where high
temperatures can occur, such as in a car
which is parked in the sun.
• Rain, moisture (e.g. dripping and splashing)
and excessive heat are bad for the radio and
the batteries.
Recycling
Please observe the local regulations
regarding the disposal of packing
materials, exhausted batteries and old equipment.
• All redundant packaging material has been
omitted. We have done our utmost to make
the packaging easily separable into three
mono-materials:
– cardboard (box),
– expandable polystyrene (buffer)
– polyethylene (bags, protective foam sheet)
• Your set consists of materials which can be
recycled if disassembled by a specialized
company.
• Do not dispose of exhausted batteries with
your household waste.
Hide quick links:
Advertisement
Table of Contents
