Display; Switching The Display Mode - Grundig YB-P 2000 User Manual

Display

The display provides information about the functioning of your
world receiver:
– While the radio is switched off, the current time will be
indicated. The first time it is used, or if the memory is
erased, '0:00' will appear on the display.
– When the radio is switched on, the frequency in kHz or
MHz and the wave band FM, MW, SW1 or SW2 will be
indicated.
– When the alarm is switched on, the alarm mode (ALARM
and radio or buzzer) will be indicated.
– ! @ this indicator lights up when a certain station is correctly
tuned to.
– indicates stereo reception for FM.
– SLEEP indicates that the sleep time function is active.
– LOCK indicates that all buttons are locked.
– indicates that batteries should be replaced
– MEMO lights up when you are storing stations.
DISPLAY

Switching the display mode

You can change the information that appears on the display of
the YB-P 2000, with the MODE button.
When the radio is off:
EON
– The display shows the current time mode (
• If you wish to check the other settings, press MODE briefly.
– The display changes each time you press the button.
– The display will return to the current time automatically after
five seconds (or press MODE briefly).
When the radio is on:
– The display shows the frequency.
• If you wish to check the other settings, press MODE briefly.
– The display changes each time you press the button.
– The display will return to the frequency indication
automatically after five seconds (or press MODE briefly).
YB-P 2000 page 5
or ).
HOME DUAL
5