Controls - Grundig YB-P 2000 User Manual

YB-P 2000 page 4
Leather cover
Your YB-P 2000 comes with a leather cover which is used both
to protect the set and to use the radio in an inclined position.
• Rotate the leather cover as shown in the illustration. You can
now use the set in an inclined position.
PO WER
Notes
The unit meets the CEE regulations concerning interference
radiation.
This product fulfills European directives 89/336/EEC,
73/23/EEC and 93/68/EEC.
This set complies with the safety regulations according to
DIN EN 60065 (VDE 0860) and thus with the international
safety regulations according to IEC 65000.
The model number is located on the back of the set.
4

CONTROLS

Controls (page 3)
DC 4.5 V ->+ – connection socket for a mains adapter
p
MONO/STEREO
VOLUME E
FM MW SW1 SW2 – band selector switch
LIGHT
H 3 / M 4
POWER
1 LOCK
METER
RADIO/BUZZ
SLEEP
BATTERIES
RESET
FREQ
1...0
MODE
ALARM
MEMO/
TIME SET
– socket for connecting stereo headphones
– for mono/stereo selection
– for adjusting the volume
– for illuminating the display
– for tuning to a radio station
– for setting hours/minutes
– for switching the radio on and off
– for blocking all button functions
– for selecting the short-wave band
– for setting the alarm to radio or buzzer
– for switching on the sleep function
– inside the batteries compartment:
SW FREQ. selector
AM STEP selector (see pages 19/20).
– for erasing the memory
– for entering frequencies
– for direct numeric entries (1...0)
– for selecting and storing preset stations (1...5)
– to change the display mode
– for switching the alarm on and off
– for programming stations into the memory
– for setting the time ( /
HOME DUAL
/ )
ALARM