Table of Contents
Advertisement
❒
Selecting a satellite channel
1
Use the numeric keys on the remote control unit if
you wish to directly enter the number of the desired
programme position (multi-digit numbers must be
entered within 3 seconds).
2
Use the ] | keys on the remote control unit or
the
keys on the receiver to step through the
programme positions (when pressing and holding
down a key, the programme positions scroll at high
speed).
❒
Stand-by
Use the
key on the remote control unit or the
1
b
key on the front panel of the receiver to switch the
receiver to stand-by.
2
Use the same keys to switch the receiver on from
stand-by with the last selected programme position
(last station memory).
Use the ] | keys on the remote control unit or
3
the
keys on the receiver to switch the receiver
on again from stand-by.
4
Using the remote control unit's numeric keypad,
you can also directly select the desired programme
position on A stand-by.
❒
Locking the receiver
With the receiver lock option "
settings" menu, you can lock all receiver functions
(see description of "The basic settings menu" in the
"Settings" chapter at page 12).
❒
Favourite programmes
To have a fast access to your favourite program-
mes, you can mark these programmes.
In normal mode, the ] | keys switch to the next
higher or next lower programme position.
In favourite mode, the ] | keys will only switch
to programme positions which have been marked
before as favourite programmes. Not marked pro-
gramme positions are skipped. The symbol "
appears in front of the programme position
number.
1
Press the
¢
key to toggle between normal and
T XT
favourite mode.
If you use the numeric keys to directly select a pro-
gramme position (also a favourite programme posi-
tion), or if you switch to stand-by, the favourite
mode is automatically de-activated.
" in the "basic
)
...
"
(
To mark a programme as favourite programme,
select the corresponding programme position and
call up the "Programme position setup" menu. Then
select
the
"
(
(see description of the "Programme position setup"
menu).
❒
Sound mute
1
Press the
¢
key to mute and restore the sound.
As long as the sound is muted, the
played in the top right corner of the picture screen.
❒
Status display
1
Press the
key to switch on the status display.
.
After a few seconds, the status display disappears
automatically.
&
A
300
11.494 GHZ
$
V–
7.02 MHZ
~
PANDA
16:35
1:
2:
The display shows the time, the programme posi-
tion number and the settings made for this pro-
gramme position (for an explanation, see next
chapter).
As long as the status display is on, you can use the
2
1
4
...
keys to call up the menus.
❒
Volume Control
Pressing one of the
1
x c
me control menu.
24
/ OK
The volume control is only effective on the "TV"
EURO-AV socket, the modulator output and the
cinch sockets AUDIO OUT. It has no effect on the
video recorder (VCR) and decoder (DEC) EURO-AV
sockets.
With the
buttons, you can adjust a volume
2
x c
value between 0 and 31.
Press the
button to store the volume setting in
O
3
memory.
As long as the setting is not yet stored in memory,
pressing the
button will restore the old setting.
.
If neither the
nor the
.
menu is exited after a few seconds. The set value
remains valid until the receiver is switched to
standby. Then the old setting is recovered.
"
option
in
the
menu
symbol is dis-
7.20 MHZ
BW 1
SU
&
/
3:
4:
$
buttons displays the volu-
button is pressed, the
O
9
Advertisement
Table of Contents
