Detaching And Attaching The Front Panel; Radio; Listening To Radio - Alpine CDA-9833R Owner's Manual

Detaching and Attaching the Front Panel

Detaching
1
Turn off the unit power.
2
Press (Release) at the upper left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
2
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel
to avoid pushing buttons by mistake.
SOURCE/
POWER

Listening to Radio

1
2
3
1 1
• The initial mode is Distance mode.
4
• The ST indicator appears on the display when a stereo FM station

Radio

TUNE/ BAND/
A.ME TEL. SEARCH/Q.S.
g f Rotary
encoder
Press SOURCE/POWER until a radio frequency
appears in the display.
Press BAND/TEL. repeatedly until the desired
radio band is displayed.
FM1 → FM2 → FM3 → MW → LW → FM1
Press TUNE/A.ME to select the tuning mode.
CDA-9835R:
DX (Distance mode) → LOCAL (Local mode) →
MANUAL (Manual mode) → DX
CDA-9833R:
DX SEEK (Distance mode) → SEEK (Local mode) →
OFF (Manual mode) → DX SEEK
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
Press g or f to tune in the desired station.
Holding down g or f will change the frequency
continuously.
is tuned in.
F Preset buttons
(1 through 6)
7
-EN