Displaying Radio Text; Cd/Mp3/Wma; Playback - Alpine CDA-9833R Owner's Manual

Displaying Radio Text

Text messages from a radio station can be displayed.
Press TITLE while receiving FM in the radio mode to
select the Radio Text display.
The display will change every time the button is pressed.
CDA-9835R * 1
PS (Programme
Radio Text*
Service Name)
→
FREQUENCY FREQUENCY
EXTERNAL AMPLIFIER
INFORMATION
FREQUENCY
CDA-9833R
PS (Programme
Radio Text*
Service Name)
→
FREQUENCY
FREQUENCY
4
*
PS (Programme
FREQUENCY
Service Name)
→
EXTERNAL AMPLIFIER
FREQUENCY
INFORMATION
The display shows "WAITING" for a few seconds, then starts
scrolling the text message.
1
* The display example for the normal display mode is described. The
display changes depending on the display indication pattern. (See
"Switching the Display modes" on page 6)
2
* If there is no receivable text message or the unit cannot receive a
text message properly, the display shows "NO TEXT."
3
* TITLE can be input or erased.
4
* Only when an external Amplifier Link compatible amplifier is
connected. For details, refer to "Displaying the External Amplifier
Information" (page 26).
12
-EN
2
3
TITLE*
→
FREQUENCY
* 4
PS (Programme
Service Name)
→
FREQUENCY
2
TITLE* 3
→
FREQUENCY

CD/MP3/WMA

SOURCE/
POWER -/J
→
Rotary
g f
encoder

Playback

→
1
Press c.
The movable display will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
3
While playing back MP3/WMA, press 8 or 9 to
select the desired folder.
Pressing and holding 8 or 9 will change folders
continuously.
4
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
5
To pause playback, press -/J.
Pressing -/J again will resume playback.
6
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds
with the movable display open.
TITLE 8 SEARCH/Q.S.
9 F ) 5( )
4(
c
6( )