Receiving Traffic Information While Playing Usb Audio Or Radio; Displaying Radio Text; Cd/Mp3/Wma/Aac; Playback - Alpine CDE-W296BT Operating Instructions Manual

Receiving Traffic Information While Playing
USB Audio or Radio
1
Press and hold OBANDTA for at least 2 seconds so that
the "G" indicator lights up.
2
Press  or  to select a traffic information station if
necessary.
When a traffic information broadcast starts, the unit
automatically mutes the audio source (such as CD, regular FM
broadcast, USB AUDIO, etc.).
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In other audio source mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Note
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. If the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station that
broadcasts the traffic information when it occurs.
3
Press and hold OBANDTA for at least 2 seconds to
deactivate the Traffic Information mode.
The "G" indicator goes out.

Displaying Radio Text

Text messages from a radio station can be displayed.
Press U VIEW while receiving FM in the radio mode to
select the Radio Text display.
The display will change every time the button is pressed.
For details, refer to "Displaying the Text" on page 25.
14
-EN

CD/MP3/WMA/AAC

 CDE-W296BT
Preset buttons
(1 through 3)



/SOURCE
/ENTER

Rotary encoder
 CDE-195BT
/SOURCE Rotary encoder

 /ENTER


Playback

1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
 CDE-W296BT
Preset buttons
(4 through 6)

 5
4

Preset buttons
(1 through 6)
4
5