Alpine IVX-C806 Owner's Manual page 59

MD (IVX-M706 only)
The MD could not be inserted.
• Another MD is already inserted.
- Eject the inserted MD and insert the MD.
• The MD is inserted incorrectly.
- Insert the MD correctly.
Sound skips due to vibration.
• Improper mounting.
- Securely re-mount the unit.
Sound skips without vibration.
• Dirty or scratched MD. Bad recording condition.
- Change the MD.
The play back won't start.
• Dirty or scratched MD. Bad recording condition. A
non-recorded MD. Not a music MD.
- Change the MD.
• Dew condensation.
- Wait for a while before using.
The power turns on but the playback won't start.
• The sound volume level of the head unit is adjusted to
minimum.
- Increase the sound volume of the head unit.
Indication for CD Player (IVX-C806 only)
HI-TEMP
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature
returns to within operation range.
NO DISC
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, "NO DISC" is displayed
and the unit does not start to play or eject the disc.
- Remove the disc by following these steps:
1) Press the c button.
The movable display will open.
2) Press the c button again for at least 3 seconds while
the movable display is open.
ERROR
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting,
press the c button again.
If the error indication still does not turn off after
pressing the c button for a few times, consult your
Alpine dealer.
NOTE
When the "ERROR" is displayed:
In case that the disc cannot be ejected by pressing the c
button, press the RESET switch (refer to page 8) and press
the c button again.
If not ejecting, consult your Alpine dealer.
57
-EN