Titling Cds - Alpine IVX-C806 Owner's Manual

Titling CDs

You can title up to 120 CDs (max.).
Immediately after inputting titles or changing the
settings of Initialize Mode or Display Mode (While
the system is inputting the titles or data
automatically) do not turn the ignition key (engine
key) to OFF.
Otherwise, the title may not be written, or the
settings may not be changed.
NOTE
The Parking Brake must be engaged to access the TITLE
INPUT mode screen. Attempting to access this screen
while driving will display the warning-CAN'T OPERATE
WHILE DRIVING.
1
Activate the CD mode.
Play a CD that you want to title (name).
2
Press and hold the INPUT button for at least 2
seconds.
The Title Inputting screen appears in the display.
3
Characters are displayed at the bottom menu.
Rotate the rotary encoder and select the desired
character for the first position.
To change between upper case, lower case,
numeral and symbol, press the 3 (A/1) button.
Each press changes the bottom menu.
4
When the character for the first position has
been selected, press the rotary encoder. The first
character has been memorized at the first
position. See "Notes" on page.
5
Repeat steps 3 and 4 to enter the rest of
characters. You can input up to 12 characters for
titling one CD.
6
When titling has been completed, press the 6
(WRITE) button to store the title in memory.
The display changes to the CD mode.
The input titles will be displayed when a CD titled
is selected.
NOTES
If the memory capacity for CD titles is full and if you
attempt to title a new CD, the oldest title will be
erased to make room for the new one. To delete a title,
select the title you want to delete, then select "SPC"
(space) and press the 6 (WRITE)
When the 1 (; BACK) or 2 (NEXT -)
pressed, the cursor moves to the left or right on the
input titles.
If an incorrect character has been entered, select
"SPC" (space) and input a new character, or press the
4 (DELETE)
button
to delete the previous character.
Press the 5 (CLEAR)
button
to erase all the characters you have input.
Pressing the FUNC (RETURN)
Input mode changes the display back to the previous
display.
You can title the VIDEO CD/CD while it is in DVD or
DVD changer mode. The title you entered is displayed
in the Disc Title List display (P. 25)
(Do not operate while driving. Stop the car, then use
this operation.)
When the DVA-5205P is connected:
To display the title input screen, switch to the DVD
main screen mode and press and hold the INPUT
button for at least 2 seconds while playing the video
CD or CD.
To display the list of disc titles, switch to the DVD
main screen mode and press the LIST button while
playing the video CD or CD.
button
.
button
is
while inputting the titles
button in the Title
41
-EN