Searching For Titled Discs; Cd Text Scroll Setting; Multi-Changer Selection - Alpine TDA-7592R Owner's Manual

Searching for Titled Discs

If a CD is titled, you can do a search for it. (To title
CDs, refer to "Titling Discs" on page 24.)
1
Press and hold the T.S.M. button for at least 2
seconds. The title blinks in the display.
2
Press the g DN or f UP button to select
the desired disc title.
3
Press the T.S.M. button to play the selected disc.
The unit will automatically search for the disc
and begin play.
4
Press the T.S.M. button for at least 2 seconds to
cancel the disc searching mode.
NOTE
This function cannot be performed when using a multi-
changer switching device.

CD Text Scroll Setting

This CD player has the ability to scroll the disc
and track name recorded on CD-Text discs. The
scrolling feature will work with names greater than
8 characters.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP button repeatedly to select
"SCR".
Each press of the f UP button changes the
modes as shown:
→ FM-LV → REG → PTY31 → HI-FI/NORMAL/STABLE → AMBER
DEMO ← AUX ← SCR ← MUTE ← BEEP ← SUB ← DIM ←
NOTE
If you press the g DN button the display scrolls in
reverse sequence.
3
Press the TUNE button to toggle mode between
SCR AUTO and MANU.
• SCROLL AUTO: the display of CD text is
scrolled continuously.
• SCROLL MANUAL: the display is scrolled only
when a disc is loaded or when a track is
changed.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
• Initial mode is "SCR MANU."
• The unit scrolls only CD text names. The disc titles
input manually (refer to page 24) cannot be scrolled.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD
Changers. When operating two or more changers,
the KCA-400C (Multi-Changer Switching device)
must be used. If you use 1 Switching device, you
can connect up to 4 CD Changers. If you use 2
Switching devices, you can connect up to 6 CD
Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two
external outputs (AUX).
1
Press the SOURCE button to activate the CD
Changer mode.
Alternatively, press the SOURCE button on the
Remote Control (RUE-4187) to activate the CD
Changer mode. Proceed to Step 3 below to
select the desired CD Changer.
SOURCE
2
Press the BAND button or the RUE-4187 to
activate the CD Changer Selection mode.
3
The CD Changer Selection mode remains active
for 3 seconds after Step 2 is performed. Press
the BAND button until the desired CD Changer
indicator appears on the display.
NOTE
If the selected CD Changer is not connected, the display
will show "NO CHGRX."
Alternatively press the BAND button on the
Remote Control until the desired changer
indicator appears on the display.
4
Operate the selected changer.
NOTE
For further details about the external input (AUX) when
using KCA-410C, see "Setting the AUX Mode (V-Link)"
on page 8.
Changer
BAND
25
-EN