Buzzer Signal For Focus Assistant; Status Led Behavior And Buzzer Signal For Levelling Assistant; Replacing The Lens - Axis Q1614 User Manual

AXIS Q1614 Network Camera
Hardware Overview

Buzzer Signal for Focus Assistant

Buzzer
Fast interval
Medium interval
Slow interval

Status LED Behavior and Buzzer Signal for Levelling Assistant

For information on the Function button used for levelling the camera, see Connectors and Buttons.
Color
Fixed green
Flashing green
Flashing orange
Flashing red

Replacing the lens

It is possible to use optional lenses for the Axis product.
To replace the lens:
1. Disconnect the iris cable.
2. Unscrew the standard lens.
3. Attach and screw on the new lens.
Note
There is no need to restart the Axis product after changing the lens. However, the product must be restarted if you are
interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the Axis
product must be connected to the network.
To change the iris configuration:
1. Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.
2. Click Edit.
3. Select the installed iris lens from the drop-down list and click OK.
Buzzer
Continuous beep
Fast interval
Medium interval
Slow interval
Lens
Optimally adjusted
Less optimally adjusted
Poorly adjusted
9
Camera position
Level
Almost level
Not level
Far from level