Axis Q1614 User Manual page 69

AXIS Q1614 Network Camera
Technical Specifications
Function
0 V DC (-)
DC output
Configurable
(Input or Output)
3.
I/O configured as input
4.
I/O configured as output
Audio Connector
3.5 mm audio connectors
(stereo)
1 Tip
2 Ring
3 Sleeve
Pin Notes
1
2
Can be used to power auxiliary equipment.
Note: This pin can only be used as power out.
3–4
Digital input – Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate.
Digital output – Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an inductive
load, e.g. a relay, a diode must be connected in parallel with
the load, for protection against voltage transients.
Audio Input
Balanced Microphone Hot (+) In/Unbalance
Microphone In/Line In
Balanced Microphone Cold (-) In
Ground
Audio Output
Line out (mono)
Ground
69
Specifications
12 V DC
Max load = 50 mA
0 to max 30 V DC
0 to max 30 V DC, open drain,
100 mA