Usb Controller; Usb Legacy Support; Onboard Lan; Init Display First - Gigabyte GA-8SIMLFS User Manual

Share Memory Size
4MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size.(Default Value:32MB)

USB Controller

Disable this option if you are not using the onboard USB feature.
Enabled Enable USB Controller. (Default value)
Disabled Disable USB Controller.

USB Legacy Support

Enabled Enable USB Legacy Support.
Disabled Disable this function.(Default Value)

Onboard Lan

Disabled Disable this function.
Enabled Enable Onboard Lan Chip function. (Default Value)

Init Display First

This feature allows you to select the first initation of the monitor display from which card, when you
install an AGP VGA card and a PCI VGA card on board.
PCI Set Init Display First to PCI Slot.
AGP Set Init Display First to AGP. (Default value)
OnBoard FDC
When enabled, the fioppy diskette drive (FDD) controller is activated.
Disabled Disable this function.
Enabled Enable on board floppy disk controller.(Default value)
Onboard Serial Port A
Auto BIOS will automatically setup the port A address.
3F8/IRQ4 Enable onboard Serial port A and using daddress 3F8 , IRQ4. (Default Value)
2F8/IRQ3 Enable onboard Serial port A and using daddress 2F8 , IRQ3.
3E8/IRQ4 Enable onboard Serial port A and using daddress 3E8 , IRQ4.
2E8/IRQ3 Enable onboard Serial port A and using daddress 2E8 , IRQ3.
Disabled Disable onboard Serial port A.
- 35 - BIOS Setup