Table of Contents
Advertisement
9
Set MODEM Use IRQ to 9.
10
Set MODEM Use IRQ to 10.
11
Set MODEM Use IRQ to 11.
Soft-off by Power Button
Off
The user press the power button once, he can turn off the system.
(Default Value)
Suspend
The user press the power button once, then he can enter suspend mode.
System after AC Back
Last State
When AC-power back to the system, the system will return to the Last state
before AC-power off.
Off
When AC-power back to the system, the system will be in "Off" state.
(Default Value)
On
When AC-power back to the system, the system will be in "On" state.
IRQ [3-7, 9-15], NMI
Disabled
Disable this function.
Enabled
Enable this function. (Default value)
ModemRingOn/WakeOnLAN
An incoming call via modem awakes the system from its soft-off mode./When set at Enabled, an input
signal comes from the other client/server on the LAN awarks the system from a soft off state if
connected over LAN.
Disabled
Disable Modem Ring on/wake on Lan function.
Enabled
Enable Modem Ring on/wake on Lan. (Default Value)
PME Event Wake UP
When set at Enabled, any PCI-PM event awarkes the system from a PCI-PM controlled state
Disabled
Disable this function.(Default Value)
Enabled
Enable PME Event Wake up. (Default Value)
- 39 -
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
