Xante Accel-a-Writer 8200 Options Manual page 6

Hide thumbs Also See for Accel-a-Writer 8200:

Table of Contents

Plug the connector from the feeder into the socket in the

printer (fig. 9.4). Then, replace the connector cover on the

printer.

Fig. 9.4 Connect the Feeder to the Printer

Latch the two securing locks on each side of the feeder by

reaching under the icons and pushing the lock toward the back

of the printer (fig. 9.1).

Reconnect the power cord and all interface cables.

10.

Slide a filled, 250 sheet paper cassette into the feeder.

11.

Turn on your printer.

If the cassettes are the same size, you may want to chain them so that

when one empties, the printer automatically begins drawing from the

second one. For details, see "Tray Chaining" in chapter 6.

Note: If you try to chain the two cassettes with different size media

in each, you will get a PAPER OUT message when the first

paper tray is empty.

Optional Cassette Supporter

If you need a higher capacity than the 250 sheets gained with the

paper feeder, you can add a cassette supporter and 500 sheet

letter/A4 tray. This supporter raises the feeder so that a 500 sheet

letter/A4 (only) size cassette will fit into it.

9-6

Optionsbb

___________________________________________

Table of Contents