EverFocus EAN Plus Series User Manual page 53

White Balance Settings: Select the mode that delivers the best quality image for the camera's light
environment. There are five options: Auto, Manual, Indoor, Outdoor, One Push.
Auto: Select to let the camera automatically adjust the White Balance. In the Auto mode the

camera computes the white balance value output using color information from the entire
screen. It outputs the proper value using the color temperature radiating from a black subject
based on a range of value from 3000 to 7500K.
Manual: Select to adjust the Red and Blue values yourself in the fields below this field.

Indoor: Select to use the default settings for indoor environments. In the Indoor mode, the

camera uses 3200K as the base value.
Outdoor: Select to use the default settings for outdoor environment. In the Outdoor mode, it

uses 5800K as the base value.
One Push: Select to enable the Push button

allow you to force the camera to readjust the white balance every time you push the Push
button. The lens will hold the same focal position until the next trigger command is received.
This function helps to prevent incorrect focusing in dark environments. This function is only
available for EAN3120 Plus / 3220 Plus.
Manual Temperature: Select to use the optimized Red and Blue settings. You can also

optionally adjust the Manual Level below this field for setting up the color temperature. The
higher the value, the more the color temperature. This function is only available for EAN3300
Plus.
Day/Night Settings:
Auto: Select to let the camera automatically switch to Night mode (black and white) when the

light levels fall to a specified level, and back to Day mode (color) when the light levels rise to a
specified level.
Day: Select to keep the camera in Day mode (color), even in nighttime.

Night: Select to keep the camera in Night mode (black and white), even in daytime.

IR Smart Settings: Select ON and set up the level to enhance the image quality when the images are
over exposure. This function is useful when the camera is in the Night mode. This function is only
available for EAN3220 Plus.
Saturation: Set the saturation value. This function is not available for EAN3220 Plus.
Monitor Type: Select a gamma value from Set 1, Set 2 or Set 3. This function is only available for
EAN3120 Plus.
Negative: Switch this setting ON to view a color negative version of the video image. This is useful
at night or when viewing temperature-sensitive images.
next to the Mode drop-down field. This will
46
EAN Plus Series