Accessing The User Interface; Assigning An Ip Address - EverFocus EAN Plus Series User Manual

5. Accessing the User Interface

This section explains how to access the Web interface of the camera for configuration.
5.1

Assigning an IP Address

You have to assign an IP address for your camera to be accessible. To assign an IP address to the
camera, use the IP Utility (IPU) software included in the software CD. Please connect the IP camera in
the same LAN of your computer.
1. Install and then start the IPU program
2. Click Find Devices to search the cameras connected in the LAN. The default network values of the
cameras will be displayed. By default, the network protocol of the camera is DHCP.
3. To configure the network settings, select a camera and then click Login/Multi Login to log in.
. The following dialog box appears.
8
EAN Plus Series