MAIN MENU SETUP GUIDE
Step 3: User can setup all channels with same parameters, checkmark "all", then to do relevant setup.
Step 4: Click "default" button to restore default setting; click "apply" button to save the setting; click "exit" button to
exit current interface.
Definitions and descriptions of network stream:
Parameter
FPS
Resolution
Quality
Encode
Max bit rate
4.7 User Management Configuration
Step 1: Enter into system configurationuser management configuration; refer to Fig 4-34:
Step2: Click Add button, a dialog box will pop-up shown as Fig 4-35:
General: Input user name, password; select user type: normal or advance.
Range from: 1-30
Supports CIF and D1
The quality of the video image. The higher the value is, the clearer
the recorded image, and the more hard drive space the recordings
take up. Six options: lowest, lower, low, medium, higher and highest.
VBR and CBR
Range from: 64 Kbps, 128 Kbps, 256 Kbps, 512 Kbps, 768 Kbps,
1Mbps, 2 Mbps
Fig 4-34 User Management Configuration
Fig 4-35 Add-General
37 |
P a g e
Meaning
QT426 User Manual