Hardware Connections - ZyXEL Communications P-660HN-T1H Quick Start Manual

Hardware Connections

This section shows you how to set up your P-660HN-T1H.
4
3
1. DSL: Use a telephone wire to connect your P-660HN-T1H's DSL port
to a telephone jack (or to a splitter, if one is already installed).
2. LAN: Use an Ethernet cable to connect a computer to a LAN port for
initial configuration and/or Internet access.
3. POWER: Use the power adaptor provided with your P-660HN-T1H to
connect an appropriate power source to the POWER socket. Make
sure the power source is on.
4. Push the ON/OFF button to the ON position. Look at the lights on the
front panel.
4
2
1