Status Page - ZyXEL Communications P-660HN-T1H Quick Start Manual

• The POWER light blinks while your P-660HN-T1H starts up and
stays on once it is ready. The DSL light is on when the P-660HN-
T1H has a DSL connection, and the WLAN light is on when the
wireless LAN is ready. The INTERNET light is on when you are
able to access the Internet and blinks when the P-660HN-T1H is
sending or receiving data.
• Each LAN light stays on if the corresponding LAN port is properly
connected and blinks when there is traffic.
If any of these lights are not on, check your connections, and inspect
your cables for damage. If the lights are still off, contact your local
vendor.

Status Page

1. In your browser, go to http://192.168.1.1.
2. Enter the default password 1234 and click Login.
P-660HN-T1H
5