Table of Contents
Advertisement
HC-155
Exhaust System
Spark Arrestor Screen
Level 2.
Parts Required:
Spark Arrestor Screen, Gasket
1. Remove spark plug lead.
2. Remove muffler cover.
3. Place piston at Top Dead Center (TDC) to prevent
carbon/dirt from entering cylinder.
4. Remove exhaust guide (A), gasket (B), and screen (C) from
muffler body.
5. Clean carbon deposits from muffler components.
Note: When cleaning carbon deposits, be careful not to
damage the catalytic element inside muffler.
6. Replace screen if it is cracked, plugged, or has holes burned
through.
7. Assemble components in reverse order.
Exhaust Port Cleaning
Level 2.
Parts Required:
As needed: Heat Shield
1. Remove spark plug lead from spark plug, and remove
muffler cover.
2. Place piston at top dead center. Remove muffler(A), heat
shield (B), and eyeplate (C).
3. Use a wood or plastic scraping tool to clean deposits from
cylinder exhaust port.
Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when
cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.
X7502256706
© 9/2013 ECHO Inc.
MAINTENANCE
A
A
C
B
C
B
23
Advertisement
Table of Contents
